Search the Community
Showing results for tags 'reliability'.
At Backblaze we now have 34,881 drives and store over 100 petabytes of data. We continually track how our disk drives are doing, which ones are reliable, and which ones need to be replaced. I did a blog post back in January, called â€œWhat Hard Drive Should I Buy?â€ It covered the reliability of each of the drive models that we use. This month Iâ€™m updating those numbers and sharing some surprising new findings. Reliability of Hard Drive Brands Losing a disk drive at Backblaze is not a big deal. Every file we back up is replicated across multiple drives in the data center. When a drive fails, it is promptly replaced, and its data is restored. Even so, we still try to avoid failing drives, because replacing them costs money. We carefully track which drives are doing well and which are not, to help us when selecting new drives to buy. The good news is that the chart today looks a lot like the one from January, and that most of the drives are continuing to perform well. Itâ€™s nice when things are stable. The surprising (and bad) news is that Seagate 3.0TB drives are failing a lot more, with their failure rate jumping from 9% to 15%. The Western Digital 3TB drives have also failed more, with their rate going up from 4% to 7%. In the chart below, the grey bars are the failure rates up through the end of 2013, and the colored bars are the failure rates including all of the data up through the end of June, 2014. You can see that all the HGST (formerly Hitachi) drives, the Seagate 1.5 TB and 4.0 TB, and Western Digital 1.0 TB drives are all continuing to perform as well as they were before. But the Seagate and Western Digital 3.0 TB drives failure rates are up quite a bit. What is the likely cause of this? It may be that those drives are less well-suited to the data center environment. Or it could be that getting them by drive farming and removing them from external USB enclosures caused problems. Weâ€™ll continue to monitor and report on how these drives perform in the future. Should we switch to enterprise drives? Assuming we continue to see a failure rate of 15% on these drives, would it make sense to switch to â€œenterpriseâ€ drives instead? There are two answers to this question: Today on Amazon, a Seagate 3 TB â€œenterpriseâ€ drive costs $235 versus a Seagate 3 TB â€œdesktopâ€ drive costs $102. Most of the drives we get have a 3-year warranty, making failures a non-issue from a cost perspective for that period. However, even if there were no warranty, a 15% annual failure rate on the consumer â€œdesktopâ€ drive and a 0% failure rate on the â€œenterpriseâ€ drive, the breakeven would be 10 years, which is longer than we expect to even run the drives for. The assumption that â€œenterpriseâ€ drives would work better than â€œconsumerâ€ drives has not been true in our tests. I analyzed both of these types of drives in our system and found that their failure rates in our environment were very similar â€” with the â€œconsumerâ€ drives actually being slightly more reliable. Detailed Reliability of Hard Drive Models This table shows the detailed breakdown of how many of which drives we have, how old they are on average, and what the failure rate is. It includes all drive models that we have at least 200 of. A couple of models are new to Backblaze and show a failure rate of â€œn/aâ€ because there isnâ€™t enough data yet for reliable numbers. Number of Hard Drives by Model at Backblaze Model Size Number of Drives Average Age in years Annual Failure Rate Seagate Desktop HDD.15 (ST4000DM000) 4.0TB 9619 0.6 3.0% HGST Deskstar 7K2000 (HGST HDS722020ALA330) 2.0TB 4706 3.4 1.1% HGST Deskstar 5K3000 (HGST HDS5C3030ALA630) 3.0TB 4593 2.1 0.7% Seagate Barracuda 7200.14 (ST3000DM001) 3.0TB 3846 1.9 15.7% HGST Megascale 4000.B (HGST HMS5C4040BLE640) 4.0TB 2884 0.2 n/a HGST Deskstar 5K4000 (HGST HDS5C4040ALE630) 4.0TB 2627 1.2 1.2% Seagate Barracuda LP (ST31500541AS) 1.5TB 1699 4.3 9.6% HGST Megascale 4000 (HGST HMS5C4040ALE640) 4.0TB 1305 0.1 n/a HGST Deskstar 7K3000 (HGST HDS723030ALA640) 3.0TB 1022 2.6 1.4% Western Digital Red (WDC WD30EFRX) 3.0TB 776 0.5 8.8% Western Digital Caviar Green (WDC WD10EADS) 1.0TB 476 4.6 3.8% Seagate Barracuda 7200.11 (ST31500341AS) 1.5TB 365 4.3 24.9% Seagate Barracuda XT (ST33000651AS) 3.0TB 318 2.2 6.7% We use two different models of Seagate 3TB drives. The Barracuda 7200.14 is having problems, but the Barracuda XT is doing well with less than half the failure rate. There is a similar pattern with the Seagate 1.5TB drives. The Barracuda 7200.11 is having problems, but the Barracuda LP is doing well. Summary While the failure rate of Seagate and Western Digital 3 TB hard drives has started to rise, most of the consumer-grade drives in the Backblaze data center are continuing to perform well, and are a cost-effective way to provide unlimited online backup at a good price. Notes 9-30-2014 â€“ We were nicely asked by the folks at HGST to replace the name Hitachi with the name HGST given that HGST is no longer an Hitachi company. To that end we have changed Hitachi to HGST in this post and in the graph. View the full article
In November, online backup provider Backblaze published some interesting statistics on hard drive mortality based on over 25,000 units in active service. It found that failure rates were higher in the first 18 months and after three years. Those conclusions matched the findings of other studies on the subject, but frustratingly, they didn't include information on specific makes and models. Today, Backblaze is naming names. The firm has posted details on failure rates for 15 different consumer-grade hard drives, and the numbers don't look good for Seagate. See for yourself: And that doesn't even tell the whole story. In Backblaze's storage pods, Seagate's Barracuda 1.5TB has an annual failure rate of over 25%. The 5,400-RPM version of that drive fares betterâ€”its failure rate is only 10%â€”but that's still pretty high compared to the competition. The failure rate of similar Hitachi drives in the same environment is less than 2%. Only 10% of the hard drives in Backblaze's storage pods come from WD, and they're strictly low-power Green and Red models. The annual failure rates are pretty low, though: only 3-4%. Backblaze's purchasing decisions are largely driven by price, which is probably why fewer WD drives are in the mix. They tend to be a little pricier. Interestingly, two drives proved to be so unreliable in Backblaze's storage pods that they were left out of the totals completely. Seagate's Barracuda LP 2TB and WD's Green 3TB "start accumulating errors as soon as they are put into production," the company says. It thinks vibration might be part of the problem. Other Barracuda LP and Green models seem unfazed, though. Here's a look at survival rates over time: After three years, only about three quarters of the Seagate drives remain. A surprising number of those failures come between 18 and 24 months, which contradicts the overall trend noted in Backblaze's initial study. Infant mortality seems to be a bigger problem for the WD drives, while the Hitachis fail at a steady but slow rate. Backblaze says the Seagate drives are also more prone to dropping out of RAID arrays prematurely. The company uses consumer-grade drives that aren't designed explicitly for RAID environments, of course, but that doesn't seem to bother the Hitachis. They spend just 0.01% of their time in so-called "trouble" states, compared to 0.17% for the WD drives and 0.28% for the Seagates. Overall, Backblaze's data suggests that Seagate drives are less reliable than their peers. That matches my own experiences with a much smaller sample size, and it may influence our future recommendations in the System Guide. Hmm. In the meantime, kudos to Backblaze for not only collecting this data, but also publishing a detailed breakdown. View the full article